Lot 3305
SIG Sauer Model P229 Semi-Auto .40 S&W Pistol. This SIG P229 features a German made frame with a stainless U.S.A. made slide and night sights. Introduced in 1992, the P229 is an upgrade to the P228 being an identical compact firearm often used for duty or concealed carry purposes. Developed specifically for the U.S. market and assembled with both German and US-made parts, the P229 features a heavier slide to tolerate more powerful rounds the P228 is incapable of. The standard version features a DA/SA trigger. The pistol has also been made available in a Double Action Kellerman (DAK) model, which is a DAO system with two trigger reset points, and a lighter, smoother pull than that of traditional DAO handguns. Most of the above-mentioned factory variants of the P226 are also available for the P229, including the Equinox option, Elite lineup, as well as a SAS GEN 2 model. The P229 differs from its cousin the P226 in several respects, and was originally introduced to supplement and then replace the P228 by adding the .357 SIG and .40 S&W as available chamberings. The P229 was the first production handgun introduced that could chamber the .357 SIG round. The P226 and P228 were originally manufactured using a stamped-steel slide on an aluminum alloy frame. The P229 consists of a CNC-milled stainless steel slide, typically colored black with a Nitron finish. The P229's milled steel slide was introduced to handle the higher slide velocities created by the .357 SIG and .40 S&W loads, which the stamped slide of the P228 could not handle without the use of a much stiffer recoil spring. This would have made manual slide-retraction much more difficult and the use of a milled stainless slide (coupled with the new milling and stainless production capabilities found in the U.S. factory) with a standard weight recoil spring made more sense. A standard weight recoil spring for the P229 is 71 N (16 lbf). A spring weight of 89 N (20 lbf) or higher would have been required if a stamped slide was used for the .40 S&W or .357 SIG chamberings. The SAAMI maximum chamber pressures of 9mm, 9mm +P, .40 S&W, and .357 SIG are as follows: 240 MPa (35,000 psi); 265 MPa (38,500 psi); 240 MPa (35,000 psi); and 280 MPa (40,000 psi). The slide on the P226 was redesigned in a similar fashion, and civilian sales of the P228 were discontinued in early 2005 due to declining sales and the advent of the P229 in 9mm. The P226 and P229 are both available with optional accessory rails and optional forged stainless steel frames. The P229 can be chambered in .22 LR, 9mm, .40 S&W or .357 SIG. Changing between .40 S&W and .357 SIG is as simple as switching out the barrel; both calibers use the same magazine. Conversion barrels also allow a P229 or P226 to change between a .40 S&W/.357 SIG to a 9mm caliber. The 9mm model (both railed and non-railed) can be converted to .22 LR, but in the past its receivers were not designed to provide the space needed for handling the larger rounds of .357 SIG and .40 S&W. As SIG Sauer has slowly begun adopting the E2-style grip system across the P229 model range in 2011—a move similar to what is also happening to the larger P226—they have also begun using the .357 SIG/.40 S&W spec frame dimensions for their factory 9mm P229s, presumably to streamline the number of variations in parts needed to be kept in inventory. Although the manufacturer has announced that older-configuration magazines will continue to operate in the new receiver configuration, SIG Sauer has nonetheless revised new P229 9mm factory magazines to a design that is specific to the resized magazine well of the newly reconfigured receiver/frame. As a consequence, the newer magazines are not back-compatible, due to their larger width. Caliber/ Gauge: .40 S&W; Serial Number: AE36518 Working Order: Firearm has not been tested; Background Check: Required; Keywords: Firearms, Guns; Ref: BD1573
- Provenance: Includes one magazine.
- Dimensions: 3.6 in. barrel;
- Exhibited: ***FFL Required For All Firearms Manufactured After 1898: Out-of-State Buyers Firearms must be shipped through our 3rd Party Shipper Westside Mail Center and ALL Firearms Manufactured After 1898 must be shipped to a valid holder of a Federal Firearms License. BEFORE PLACING BIDS ON FIREARMS, CHECK YOUR STATE AND COUNTY LAWS TO VERIFY THE FIREARM IS LEGAL IN YOUR STATE. It is the Bidders responsibility to know or verify the legality of a specific Firearm or Magazine prior to placing any bids. FIREARMS UNABLE TO BE SHIPPED TO YOUR STATE WILL RESULT IN A REFUND MINUS A 25% RESTOCKING FEE AND SHIPPING COSTS IF APPLICABLE; Local Arizona Buyers MUST have a Valid ARIZONA ID with a Current Physical Address and MUST complete all necessary background and registration forms at Bradford's Auction Gallery Firearms Manufactured After 1898. ANY DENIED BACKGROUND CHECK WILL RESULT IN A REFUND MINUS A 25% RESTOCKING FEE ****;
- Condition: This pistol is in good condition with signs of wear commensurate with age and use. Signs of holster finish wear on high points of the slide and frame. Please review the photos for details.
Accepted Forms of Payment:
American Express, COD (cash on delivery), Discover, MasterCard, Visa, Wire Transfer
Shipping
LOCAL PICK-UP INFORMATION:
Monday through Wednesday 10:00 AM to 4:00 PM
LOCATION: 15210 N 99th Ave Sun City, AZ 85351
CROSS STREET: (Located at the NW Corner of 99th Ave and Greenway Rd)
LOCAL PICK UP - ARIZONA FIREARMS BUYERS
Arizona residents MUST pick-up in person at Bradford's Auction Gallery with a scheduled date of pick up. Details and information will be included on the winning bidders invoice. Any local Arizona Buyer of Post 1898 firearms MUST complete all necessary registration forms at Bradford's Auction Gallery. Local Buyers MUST have a Valid ARIZONA ID with Current Physical Address. If your Arizona ID does not reflect your current address you MUST provide us with a secondary form of ID that contains your correct address. Arizona Gun Dealers must have a signed copy of their Federal Firearms License in order to accept delivery of modern weapons. ANY DENIED BACKGROUND CHECK WILL RESULT IN A REFUND MINUS A 25% RESTOCKING FEE.
OUT OF TOWN SHIPPING:
For out of town buyers, once we have received your payment your purchase will be turned over to Westside Mail Center our exclusive shipping provider. Westside Mail Center will proactively reach out to you to arrange packing, shipping and insurance.
OUT OF TOWN SHIPPING FIREARMS BUYERS:
Shipping for Out-of-State Buyers must be done through our 3rd Party Shipper Westside Mail Center. All firearms Post 1898 must be shipped to a valid holder of a Federal Firearms License on ALL Modern Weapons. The full cost of shipping and packing will be at the winning bidders / buyers expense. It is your responsibility to provide Westside Mail Center with the FFL dealer of your choice and they are responsible for sending the 3rd party shipper a copy of their FFL information. FIREARMS UNABLE TO BE SHIPPED TO YOUR STATE WILL RESULT IN A REFUND MINUS A 25% RESTOCKING FEE AND SHIPPING COSTS IF APPLICABLE.
We've Partnered with Westside Mail Center for all of your auction shipping needs. They offer FedEx, DHL, UPS and USPS services for most parcels. For those larger items, Packing, Shipping, Crating & Freight services are available. For questions related to shipping please feel free to contact them directly for shipping questions or quotes.
Westside Mail Center
13794 W Waddell Rd Suite 203, Surprise, AZ 85379
Mon-Fri 9am - 6pm, Saturdays 9am - 2pm , Closed Sundays.
Phone: 623-825-6016
Email: [email protected]
www.westsidemailcenter.com
Note: For fastest and best results on shipping, we recommend using Westside Mail Center as your shipper, but are happy to meet with your 3rd party shipper of choice if you prefer to use a shipper other than Westside Mail Center. All packing and shipping from any company besides Westside Mail Center must be arranged and coordinated by the winning bidder / buyer within 5 days from the date of the sale or an additional storage surcharge could apply.
All fees and costs associated with shipping are separate from the hammer price (winning bid), buyer's premium and sales taxes. The winning bidder / buyer is solely responsible for the shipping. Bradford's can assist the winning bidder / buyer by arranging shipping and insurance through our preferred shipper. The winning bidder / buyer has the right to arrange their own shipping with a 3rd party shipper at their own expense. Bradford's Auction Gallery reserves the right to ship parcels via our own in-house shipping methods, based on actual weight or dimensional weight (whichever is greater).
The designated 3rd party shipper will ship to the address provided on the winning bidder / buyers invoice. It is the winning bidder / buyers responsibility to communicate with the shipper and provide any specific shipping requirements, address information or details that will ensure proper delivery.
The winning bidder is responsible for understanding the import fees and import laws of their respective province/state/country. It is also the bidder's responsibility to obtain any and all import documentation (import/export licenses, certificates or other documentation) prior to bidding.
Bradford's
You agree to pay a buyer's premium of 25% and any applicable taxes and shipping.
View full terms and conditions
| From: | To: | Increments: |
|---|---|---|
| $0 | $99 | $5 |
| $100 | $199 | $10 |
| $200 | $999 | $20 |
| $1,000 | $4,999 | $50 |
| $5,000 | $9,999 | $100 |
| $10,000 + | $200 |